Table of Contents
Articles
| Prediction of tribological characteristics of powder metallurgy Ti and W added low alloy steels using artificial neural network | |
| Kandavel, Thanjavur Krishnamoorthy; Kumar, Thangaiyan Ashok; Varamban, Emaya | 503-517 |
| Nanohardness and wear behaviour of AISI 1040 steel coated with Ti-6Al-4V 4B4C by magnetron sputtering | |
| Russel, Malkiya Rasalin Prince; Natarajan, Selvakumar | 518-528 |
| A band-selective CMOS low-noise amplifier with current reuse gm boosting technique for 3-5 GHz UWB receivers | |
| Shim, Jaemin ; Jinwoopark; Jeong, Jichai | 529-537 |
| A probabilistic model of acoustic emissions generated during compression test of cementitious materials for crack mode classification | |
| Sagar, R Vidya | 537-553 |
| Effect of red mud proportion on the strength and microstructure of ferrosialate based geopolymer mortar | |
| Yeddula, Bharath Simha Reddy; Somasundaram, Karthiyaini | 554-563 |
| Effect of rare earth on microstructure and wear behaviour of Ni based microwave clad | |
| Singh, Kanwarjeet ; Sharma, Satpal | 564-572 |
| Microstructure and mechanical properties of directionally solidified alloys of Mg-9Zn-2Y | |
| Wu, Houpu ; Yang, Lianwei ; Lin, Xiaoping ; Liu, Jie ; Chai, Tao ; Dong, Yun | 573-578 |
| Experimental study on developed electrochemical micro machining of hybrid MMC | |
| Kalra, Charanjit Singh; Kumar, Vinod ; Manna, Alakesh | 579-589 |
| Optimal selection of process parameters to reduce vibration during end milling of Al 356/SiC metal matrix composite | |
| Rajeswari, Sellamani ; Sivasakthivel, Perumal Subramaniyan | 590-602 |
| Modelling and optimization of injection molding process for PBT/PET parts using modified particle swarm algorithm | |
| Kumar, Sagar ; Singh, Amit Kumar; Pathak, Vimal Kumar | 603-615 |
| Interface improvement of carbon fiber/PMMA resin composites by fiber surface coating | |
| Fengxu, Zhou | 616-622 |
| Deposition of TiC-Cu composite coating on AISI 304 stainless steel by EDC process using powder compact tool electrode | |
| D, Tijo ; Kumari, Shilpi ; Masanta, Manoj | 623-630 |
| Study on dry-sliding wear (DSW) of uncoated IN800 super alloy and sol-gel based dip coated IN800 substrate | |
| Kumar, Dipak ; Pandey, Kailash Narayan | 631-642 |
| Effect of mechanical properties on banana macro particle reinforced epoxy composites | |
| Chinnapalanichamy, Jayaseelan ; Palani, Padmanabhan ; Ayyanar, Athijayamani ; Kalimuthu, Ramanathan | 643-648 |
| Neural network modeling of forces in drilling of glass/epoxy composites filled with agro-based waste materials | |
| Dhawan, Vikas ; Debnath, Kishore ; Singh, Inderdeep ; Singh, Sehijpal | 649-658 |
| Wear properties and synthesis of CrFeNiMoTi high entropy alloy coatings produced by TIG process | |
| Islak, Serkan ; Eski, Özkan ; Koç, Vahdettin ; Özorak, Cihan | 659-664 |
| Corrosion behaviour of dissimilar TIG welded austenitic stainless steel AISI 304 and martensitic stainless steel AISI 420 | |
| Ghosh, Abhishek ; Pal, Pradip Kumar | 665-669 |
| Barkhausen noise analysis of friction stir processed steel plate | |
| Yusufzai, Mohd Zaheer Khan; Raja, Avinash Ravi; Gupta, Sanjay Kumar; Vashista, Meghanshu | 670-676 |
| Experimental study on the influence of copper oxide nano-fluid on surface integrity in turning of AISI O1 steel | |
| Shabgard, Mohammad Reza; Gholipoor, Ahad ; Javid, Sajad Lotf | 677-686 |
| Finite element modeling of girth welded pipe with multiple defects | |
| Shang, Hsu Yang; Silva, Ivan Ferreira da | 687-698 |
| Sustainable mortar mix using recycled fines obtained from construction and demolition waste | |
| Soni, Nancy ; Shukla, Dharmendra Kumar | 699-708 |
| Friction stir welding of copper: Processing and multi-objective optimization | |
| Singh, Gurmeet ; Thakur, Ankit ; Singh, Satpal ; Sharma, Neeraj | 709-716 |
| Processing parameters in the ball milling of niobium hydride: An optimization approach | |
| Silva, Gilbert ; Souza, Dalton Garcia Borges de; Gabriel, Lucas Catalani; Rodrigues, Geovani ; Silva, Carlos Eduardo Sanches da | 717-723 |
| Exploring grindability of Ti-6Al-4V using an indigenously developed environment friendly micro pump based cooling system | |
| Mahata, Sirsendu ; Mukhopadhyay, Manish ; Banerjee, Ayan ; Kundu, Arnab ; Mandal, Bijoy ; Das, Santanu | 724-729 |
| Study on microstructure and mechanical property of Ti-6Al-4V brazed joint with low temperature filler metal | |
| Kumar, Santhebachahalli Venkataramu Anil; Gandhinathan, Rangappan | 730-736 |
| Enhancement of interfacial adhesion in UHMWPE fiber/HDPE composites by electrophoretic deposition of graphene oxide on UHMWPE fibers | |
| Zhuoda, Jiang | 737-743 |
| Interfacial improvement of carbon fiber/polyoxymethylene composites by depositing functionalized carbon nanotubes on the fibers | |
| Zhu, Quping | 744-749 |
| Process optimization and comparative analysis of EDM and EDD process in machining Al6063/10% SiC metal matrix composites | |
| Kachhapa, Sabindra ; Singh, Abhishek ; Debnath, Kishore | 750-756 |
| Environment effect on microstructure properties of gas tungsten arc welding for titanium and aluminium alloy joints | |
| Kaliappan, Nandagopal ; Chidambarakuttalam, Kailasanathan | 757-763 |
| Effects of adding aluminium in zinc bath on Co-Zn interfacial reaction | |
| Liu, Yongxiong ; Yin, Fucheng ; Li, Zhi ; Chen, Zhu ; Zhao, Manxiu ; Long, Zhaohui | 764-769 |
| Experimental investigation of corrosion effect on bending fatigue of the wire ropes | |
| Salman, Ozlem ; Imrak, Cevat Erdem | 770-775 |
| Optimization of turning parameters of titanium chrome-molybdenum (Ti-Cr-Mo) alloy using taguchi method | |
| Singh, Manpreet ; Singh, Gagandeep ; Jayant, Arvind | 776-782 |
| Average austenite grain size evolution simulation during multi-pass shape metal hot rolling process | |
| Qingqiang, He ; Han, Zhu ; Jianguo, Liu ; Wanli, Chai ; Chunli, Geng ; Junyou, Zhao | 783-788 |
| Small delamination detection in carbon fibre reinforced polymer composite beam by NDT and vibration analysis | |
| Nayak, Smaranika ; Pattnaik, Swetansu ; Panigrahi, Isham ; Nayak, Rameshkumar ; Parida, Sambitkumar | 789-794 |
| Application of 2XXX and 7XXX series alloys as input material for the new casting-forging hybrid process | |
| Szuckia, Michal ; Dziubinska, Anna ; Winiarski, Grzegorz ; Majerski, Krzysztof ; Drozdowski, Krzysztof ; Gorny, Marcin ; Buras, Janusz | 795-801 |
| Pulse electrodeposition of Ni/nano-SiC composite coatings: Effect of waveform, duty cycle and current density | |
| Heidari, Gholamreza ; Khoei, Mohammad Mosavie | 802-807 |
Indian Journal of Engineering and Materials Sciences (IJEMS)